Information

Park landscape design guidelines

Park landscape design guidelines


There are a number of general key requirements and key access dimensions to consider for all installations, in order to maximise use for everyone. A continuous accessible path of travel should be provided from any car park, public transport, taxi set down area and property boundary to, around and next to all installations within a site, to support access and use by everyone. This route can consist of pathways, roadways, pedestrian crossings and ramps. It cannot incorporate any step, stairway, turnstile, revolving door, escalator, moving walk other impediment. Key requirements to consider for all installations include:.

Content:
  • Technical Stuff
  • Park development guidelines
  • NYC High Performance Landscape Guidelines
  • Landscape Design
  • Landscape Architecture Standards
  • What We Do
  • High Performance Landscape Guidelines
  • New ‘universal design’ guide wants to make public spaces pleasant for all
  • Landscape Design Guidelines for Medians
WATCH RELATED VIDEO: Landscape design ideas II best ideas II Park design

Technical Stuff

There are a number of general key requirements and key access dimensions to consider for all installations, in order to maximise use for everyone. A continuous accessible path of travel should be provided from any car park, public transport, taxi set down area and property boundary to, around and next to all installations within a site, to support access and use by everyone.

This route can consist of pathways, roadways, pedestrian crossings and ramps. It cannot incorporate any step, stairway, turnstile, revolving door, escalator, moving walk other impediment.

Key requirements to consider for all installations include:. The following key requirements and key access dimensions for barbecues must be considered in addition to those for all installations.

The following key requirements and key access dimensions for drinking fountains must be considered in addition to those for all installations. The following key requirements and key access dimensions for litter bins must be considered in addition to those for all installations. Seating and tables may be required at a range of locations. Seating in parks and along pathways for example, should incorporate a range of seats with backs and arm rests with various seat heights to supports both children and adults.

These seats should also incorporate an adjacent wheelchair space so that people can move off a path of travel and sit with others using the seats. Seating is also required in stadiums and sports facilities for spectators using wheelchairs or other mobility aids.

Accessible seating and wheelchair seating spaces should be integrated with other seating to ensure everyone including family, friends or carers can sit together and enjoy the event. Seats should incorporate backs and arm rests and as well as adjacent wheelchair spaces.

Spaces for people using wheelchairs should not be segregated from other people and should not be provided in one location only. A variety of seating options should be available at a number of locations. Clear lines of sight should be maintained from all seating to allow for ease of viewing of the installation or activity that is taking place.

Picnic tables located on a firm, level, slip resistant ground surface that provide a variety of access points e. A continuous accessible path of travel is required to accessible seating and tables. The following key requirements and key access dimensions for seating and tables must be considered in addition to those for all installations.

The following key requirements and key access dimensions for shade and shelter must be considered in addition to those for all installations. Shade and shelter, both above and around vertical and horizontal , to protect all users from extremes of weather at the following external installations:.

The following key requirements and key access dimensions for landscape design must be considered in addition to those for all installations particularly as they relate to landscape installations, for example, sculptures, arbours, water features or other structures. Back to top. Google Tag Manager. Main menu Search. Share this page: Twitter Facebook Linkedin Email. All installations There are a number of general key requirements and key access dimensions to consider for all installations, in order to maximise use for everyone.

General key requirements A continuous accessible path of travel should be provided from any car park, public transport, taxi set down area and property boundary to, around and next to all installations within a site, to support access and use by everyone. Circulation around the installation that allows for a person to approach from a variety of angles minimum mm x mm.

Installation connected to, but setback a minimum of mm from any pathway. Appropriate reach ranges and controls in accordance with Australian Standards. Lighting over the installation to required lux levels in accordance with the range in Australian Standards. Relevant Australian Standards for all installations ASBarbecues The following key requirements and key access dimensions for barbecues must be considered in addition to those for all installations.

Key requirements Easy to see and use controls at the front of the hot plate that can be reached by a person when standing or seated and used with a closed fist or open palm and incorporating raised tactile and Braille elements. Coin feed points that are easy to see and reach and alternatives to these where possible. Some low height benches with adequate leg clearance underneath, adjacent to the barbecue hot plate. Bench with a heat resistant surface adjacent to the hot plate, without any lip, to allow for cooking pans to be moved off the hot plate without the need to lift.

Low height sinks if sinks provided with adequate leg clearance underneath and incorporating lever or sensor operated taps. Key access dimensions Top of the barbecue hotplate at a height between - mm above the floor or ground level with leg clearance at a height of - mm underneath for minimum of mm.

Coin feed slots — mm high. Benches that are adjustable or have a section at a height between - mm above floor or ground level with leg clearance at a height of - mm underneath for minimum of mm. Sink - mm high with - mm leg clearance underneath. Figure 1: Barbecue area. Top of the barbecue hotplate at a height between — mm above the floor or ground level Low height benches with adequate leg clearance underneath, adjacent to the barbecue hotplate Relevant Australian Standards for barbecues ASDrinking fountains The following key requirements and key access dimensions for drinking fountains must be considered in addition to those for all installations.

Key requirements Located in an area that has appropriate drainage to ensure that any water spillage does not create an unstable, wet ground surface. Easy to access water outlet at the front of the drinking fountain bowl removing the need to stretch and lean over bowl to access water. Water receptacle located close to the ground, at rear of drinking fountain for use by companion or assistance animals.

Controls that are easy to reach and use e. Key access dimensions. Figure 2: Drinking fountain. Height of top of bowl - mm. Height of bottom of bowl - mm. Depth under bowl - mm. Circulation space around unit min.

Operating force of button no more thanBowl, arm, frame and bubbler to have a satin finish to reduce reflection and glare. Bubbler to be as close as possible to the front of the unit and able to direct water flow to a height of 80 mm. Surrounding grates are to run at a right angle to direction of travel with a maximum 13mm wide x mm long openings. Relevant Australian Standards for drinking fountains ASLitter bins The following key requirements and key access dimensions for litter bins must be considered in addition to those for all installations.

Key requirements An opening that is located at the front of the litter bin which is easy to locate and open not too heavy foot operated, in addition to swing or push operation at opening point, is preferred. Opening that can be reached by a person when standing or seated. Litter bins installed at regular intervals along pathways with co-located installation, for example, seating, lighting, barbecue areas and bike storage. A consistent distribution of litter bins in large open areas, eliminating the need to carry rubbish for long distances.

Contrasting colours and symbols to designate bin uses, for example, recyclable and waste. Key access dimensions Appropriate reach ranges and controls in accordance with Australian Standards. Relevant Australian Standards for litter bins ASSeating and tables Seating and tables may be required at a range of locations. Key requirements Seating and tables that are installed at regular intervals with co-located facilities for example, rubbish bins and bike racks. Various height seats suitable for all people including older adults and children which are free of materials that can splinter.

Seating with backs and armrests of various configuration for example, one armrest, armrests either ends and central armrest. Seating and table materials that do not retain heat or cold. Seating and tables that incorporate clear, level circulation space that allows room for the placement of items, for example, pram to rest, dog to sit, person using wheelchair to sit next to seat. Movable seating provided at reception, restaurant, kiosks, recreation facilities, retail areas and in accessible showers, incorporating backs and armrests.

Wheelchair seating spaces provided where fixed seating is available. A change of texture or ground surface colour at seating and tables to designate the area.

Tables that have rounded edges and that are free from materials that can splinter. Tables incorporating an extended end with adequate space for a person to move in underneath when seated. Where fixed seating is installed at tables, space at one end or side of the table for a person to easily move in and underneath, if using a wheelchair. Accessible spectator seating and wheelchair spaces at a variety of locations within relevant buildings and facilities, so users can sit with family and friends.

Figure 3: Seating and table connected to a pathway. Seating that incorporates clear, level circulation space that allows room for the placement of items, e. Minimum mm between seating and tables that are placed side by side.

Various height seating - mm with backs and armrests top installed mm above seat - mm adults, mm older adults. If children are expected to be a primary user, a seat height of mm will assist. Landscaped seating at least mm wide with an overhang of mm to allow a person to place their heels on the ground when getting up from the seat.

Fixed wheelchair seating spaces provided and located within a facility that meet the size and ratio of the space served in accordance with Australian Standards. A minimum circulation space of mm around a table to allow a person to manoeuvre easily. Minimum depth of mm under a table for a person using a wheelchair and if two spaces are located opposite on the same table, the table needs to be at least mm deep with a height under the table a minimum of mm.

Relevant Australian Standards for seating and tables ASShade and shelter The following key requirements and key access dimensions for shade and shelter must be considered in addition to those for all installations.

Key requirements Shade and shelter, both above and around vertical and horizontal , to protect all users from extremes of weather at the following external installations: accessible car parking ball courts barbecues bicycle storage and racks camp sites entrances to buildings and facilities notice boards outdoor seating pathways leading to customer service areas play spaces spectator seating swimming pools and spas transport set down and waiting areas vending machines viewing areas.

Use of the natural environment where possible, for example, bushes, large stable rocks, shrubs that do not drop excessive debris. Pathways that extend beyond the areas of shade to ensure the flow of pedestrian traffic is not interrupted. Maintenance of a clear path of travel through any shelter or infrastructure. Shade and shelter points connected to paths of travel to provide appropriate access.


Park development guidelines

Wear a mask and get vaccinated. If you're a developer working in a park, there are guidelines and specifications you need to be aware of. By beginning this survey you accept our privacy policy. Caution Covid Minimize. Home Parks and recreation Parks Parks planning and operations Park development guidelines.

of Model Urban Design Guidelines in order to facilitate development and redevelopment that c) Site design, architecture, landscaping, and parking.

NYC High Performance Landscape Guidelines

The Design Trust , a nonprofit think tank dedicated to improving public space for all New Yorkers, supported and facilitated the project, bringing their long experience in engaging multiple stakeholders and government entities. The Trust recruited and funded an interdisciplinary team of landscape architects, engineers and sustainability experts. Stephanie Carlisle SC : This book required a great deal of time, effort and collaboration in order to produce a comprehensive and interdisciplinary manual. What was that spark that set the process off? You had all of these plans being developed; you had simultaneously the development of design guidelines for streets, for infrastructure, for active living coming out of various agencies against a backdrop of a mayoral administration deeply committed to a design excellence program, deeply committed to parks and to activating the waterfront, deeply committed to sustainable development. All of these initiatives were being worked on disparately, and then simultaneously you had a year heritage here at the Parks Department of trying to design more in cooperation with nature based on the early work of the Natural Resources Group. On the other hand we still have the great historical landscape parks and the traditional playgrounds, and are having to build new projects that are going to last a long time without a lot of complicated maintenance. You had a tension between traditional park and playground design and a desire to do things in a more environmentally sustainable way.

Landscape Design

It includes hard landscaping paving, furniture, fences, walls, pools, etc. It is an integral part of any residential development design. The landscape design of any apartment development should relate to existing natural and cultural features. The long-term management and maintenance of any landscape works must be considered at the design stage.

The Landscape Design discipline includes all the elements surrounding the buildings and facilities as well as the connecting areas between the various buildings on Campus.

Landscape Architecture Standards

Michele Adams , Sustainable Design Fellow. Steven Caputo , Urban Design Fellow. Tavis Dockwiller , Landscape Architecture Fellow. Andrew Lavallee , Landscape Architecture Fellow. The Guidelines cover every aspect of creating sustainable parks, from design to construction to maintenance, and feature hundreds of best practices for managing soil, water, and vegetation resources, as well as dozens of full-color photos and illustrations.

What We Do

To assist us in processing your fencing voucher, we ask you to submit your fencing voucher at least 8 weeks before you require installation. Please note to ensure smooth installation, all paving should be completed after the fencing is in place or should be laid at least one meter away from the proposed fence line. Enclosed is a brief overview of the landscape and irrigation packages which will be installed for you. Please take the time to read your responsibilities and the landscape options available. Please contact one of our landscape contractors listed below to arrange your landscape design consultation and installation:.

Design Guideline 5 - Existing Landscape Plants. Landscape Planting Guidelines. Figure Woonasquatucket River Water Park, Providence, RI.

High Performance Landscape Guidelines

The regional program River as Tidal Park, a large number of partners work together on the development of restored urban wetlands and tidal parks. A key resource for the ecological functioning of these urban tidal parks is sediment. Capturing, storing and keeping sediment in place requires integrated knowledge on river hydrodynamics, morphology, ecology above and under water , urban landscape design, and coastal engineering. To serve practitioners and managers with knowledge, it is necessary to develop easy-to-understand practical guidelines for the design, development and maintenance of sediment based tidal wetlands in urban settings.

New ‘universal design’ guide wants to make public spaces pleasant for all

RELATED VIDEO: How To Design The Perfect Landscape - Landscape Design 101

Background: Incidence of Lyme disease in the US continues to grow. Low-density development is also increasing in endemic regions, raising questions about the relationship between development pattern and disease. This study sought to model Lyme disease incidence rate using quantitative, practical metrics of regional landscape pattern. The objective was to progress towards the development of design guidelines that may help minimize known threats to human and environmental health. Methods: Ecological analysis was used to accommodate the integral landscape variables under study.

From splash parks to dog parks to playgrounds, these public green spaces are recreational areas that serve the needs of community members. Building a park always starts with identifying the location.

Landscape Design Guidelines for Medians

They include typical guidelines and practices to be read and implemented by the Consultant during the design process. These documents include park site and building design guidelines and items such as site furnishings options, with attached options images. They shall be used as the basis for formulation of additional design work and the preparation of the associated technical specifications. Skip to Main Content. Loading Close.

We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audiences come from. To learn more or opt-out, read our Cookie Policy. When the Americans With Disabilities Act ADA passed in , it set forth expectations around how buildings and public spaces should be designed to accommodate limited mobility.


Watch the video: Σχεδιασμός σκαλοπατιών στην Αρχιτεκτονική Τοπίου